field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

Job Title Lecturer in Computer Science/Engineering Requisition Number FE04302 Working Title Lecturer Department Name 8H040:Computer Science Work Location Lexington, KY Type of Position Faculty Position Time Status Full-Time Tenure Track Status Non-Tenure Track Required Education Master’s degree in Computer Science or Computer Engineering. Applicants with a Bachelor’s degree in Computer Science or Computer Engineering and strong industry experience will also be considered. Required Related Experience Prior relevant teaching and/or industry experience. Required License/Registration/Certification N/A Job Summary The Department of Computer Science at the University of Kentucky invites applications for the position of Lecturer. This position is a non-tenure track faculty position on a renewable one-year contract; appointments are nine-month, renewable with a start date of August 1, 2025. Longer contracts may be offered upon successful completion of initial assignments. Duties will include teaching a broad range of undergraduate courses (but not First Year Engineering courses), holding office hours, grading, supervision of teaching assistants and development of course materials. Multiple sections of lecture and laboratory courses will be offered each semester. Applicants should have strong written and oral communication skills and a commitment to excellence in undergraduate education. Lecturer positions do not have required research responsibility; however interest in research will be viewed favorably. Lecturer applicants should hold a Master’s degree in Computer Science or Computer Engineering. PhD preferred. Applicants with a Bachelor’s degree in Computer Science or Computer Engineering and strong industry experience will also be considered. Successful candidates will be expected to have prior relevant teaching and/or industry experience. Review of credentials will begin immediately and continue until the position is filled. Applications must include the following: a letter of application (upload under cover letter), a curriculum vitae or resume, and a statement of teaching philosophy (upload under Specific Request 1); as well as the names and contact information for at least three references when prompted in the application. This information may be utilized to solicit recommendation letters from your references within the employment system in advanced rounds of the interview process. Questions should be directed to HR/Employment by phone at 1-859-257-9555 press 2 or email (<a href="mailto:ukjobs@uky.edu" target="_blank">ukjobs@uky.edu</a>), or to Diane Mier (<a href="mailto:diane.mier@uky.edu" target="_blank">diane.mier@uky.edu</a>) in the department of Computer Science. Please note that, to be considered an applicant, applications must be submitted through the UK Jobs site. The University of Kentucky is located in the heart of the Bluegrass Region, one of the top ranked areas in the country for quality of life. Additional information regarding the Department and the University can be found at <a href="http://www.uky.edu" target="_blank">http://www.uky.edu</a>. Upon offer of employment, successful applicants must undergo a national background check as required by University of Kentucky Human Resources. The University of Kentucky is an equal opportunity employer and especially encourages applications from women and members of underrepresented groups. Skills / Knowledge / Abilities Does this position have supervisory responsibilities? No Preferred Education/Experience PhD in Computer Science or Computer Engineering Deadline to Apply Open Until Filled Yes Our University Community We value the well-being of each of our employees and are dedicated to creating a healthy place for everyone to work, learn and live. In the interest of maintaining a safe and healthy environment for our students, employees, patients and visitors the University of Kentucky is a Tobacco &amp; Drug Free campus. As an Equal Opportunity Employer, we strongly encourage veterans, individuals with disabilities, women, and all minorities to consider our employment opportunities. Any candidate offered a position may be required to pass pre-employment screenings as mandated by University of Kentucky Human Resources. These screenings may include a national background check and/or drug screen.

Lecturer in Computer Science/Engineering

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.Pay Range$90,000.00-$123,800.00 AnnualThis is the base salary pay range that an applicant can expect to make upon hire. &nbsp; Pay within this range will vary based upon relevant experience, skills, and education among other factors. In addition, this position is eligible for an incentive bonus.&nbsp;Johns Manville is hiring a Sr. Product Engineer. This role can be based at our Waterville, OH or Defiance, OH plant. At the interface between sales, product management and operations/engineering the main task of the job holder is to independently carry out new product development projects for the filtration and separation sector. He/she is responsible for the planning, execution, evaluation, documentation and assessment of the production trials. He/she is also responsible for the internal or external execution as well as the evaluation of application and customer specific tests. The work results are presented in the context of internal and external meetings. The work environment entails corresponding travel. The identification of weak points in the area of product, process and technology as well as the development of proposals and measures for continuous improvement complete the job holders field of activity.Your Day to Day:<ul><li>Lead filtration and separation new product development following a multistage development process (including international projects).</li><li>Development of new product ideas and new products based on assigned projects including the required documentation in the relevant authoritative documentation system.</li><li>Technical contact for customers</li><li>Testing and evaluation of news feedstocks</li><li>Planning and execution of production trial runs</li><li>Computer-aided evaluation and documentation of tests and test results</li><li>Identification of weak points in the area of product, process and technology and development of proposals and measures for continuous improvement</li><li>Commissioning, monitoring and evaluation of relevant tests</li><li>Commissioning of external customer specific testing and certification</li><li>Research, test and document performance comparison between JM and competitive products</li><li>Support sales on technical issues and as needed during joint customer visits</li><li>Participate, actively contribute and present work results at internal meetings as well as during development meetings with clients</li><li>Literature research and tracking of new technological developments as well as patent analysis</li><li>Develop patents trade secrets and or other intellectual property that provides a strategic business advantage</li><li>Understand all test methods related to product performance requirements</li><li>Maintain or write all necessary documentation such as Technical Data Sheets, Finished Product Specifications, Research Reports, Product and Raw Material Qualification Reports etc.</li><li>Participate in industry trade associations as required</li></ul>What You Bring to the Team: <ul><li>Bachelor's degree in engineering (chemical, mechanical, process) science or relevant technical field with a minimum of 5 years of related work experience</li><li>Master’s degree or PhD preferred with a minimum of 3 years of related experience</li><li>Ability to apply technical knowledge to choose alternatives and to modify methods, designs and general practices</li><li>Knowledge of statistics and data-driven decisions</li><li>Ability to make compelling case for technical recommendations to a business</li><li>Excellent interpersonal verbal and written communication skills</li><li>Proven project management skills</li><li>Strong presentation skills</li><li>Strong leadership skills</li><li>Proficient in Microsoft Word, Excel, PowerPoint, Outlook</li><li>Ability to work independently and in a team environment</li><li>Ability to interface at all levels of the organization both internally and externally</li><li>Strong analytical thinking</li><li>Solid knowledge and understanding of manufacturing processes</li><li>Moderate travel required 25 to 35% both domestic and internationally</li><li>When working in a plant may be exposed to environmental conditions of cold heat high noise levels moving mechanical parts heights dust/mist/gas/fumes, extensive walking or climbing etc.</li><li>May be required to lift carry push or pull up to and including 25 lbs</li></ul>Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Johns Manville

Senior Product Engineer

Fidelity TalentSource is your destination for discovering your next temporary role at Fidelity Investments. We are currently sourcing for a Java Full Stack Engineer to work in Merrimack, NH or Westlake, TX! The Role FIT Middleware Engineering and Governance (MEG) group is seeking a Java Full Stack Engineer with passion to be an integral part of crafting and developing applications with a focus on defining new capabilities, improvements, maintenance, and support. The role involves continuous collaboration with users, engagement with business partners and an iterative understanding of the platform to build well written requirements following Fidelity standard methodologies. You must demonstrate a propensity for detail and a willingness to learn the group’s product roadmap and take responsibility for the overall product quality. You will be responsible for ensuring a backlog of groomed work is ready for our development team to deliver upon.The Expertise You Have<ul><li>Bachelor’s degree in a related field or equivalent experience preferred. </li><li>5+ years of experience working in technology or a related field. </li><li>Proven experience in Java, Spring framework, Spring boot, Restful Service is a must. </li><li>Experience with Angular UI, TypeScript, HTML. </li><li>Experience in Github, Insomnia and CI/CD pipeline is a must. </li><li>Experience with production support is a must. </li><li>Docker and Kubernetes experience is a strong plus. </li><li>AWS experience in services like IAM, S3 and Lambda is a plus. </li><li>Knowledge in SQL and data analysis </li><li>Ability to write clean, readable, and maintainable code. </li><li>Very good communication skills with ability to do internal demos and presentations. </li><li>Basic knowledge or prior experience in the financial services domain a plus </li></ul>The Skills You Bring<ul><li>You can understand the domain in any project you work on through your ability to learn and analyze information independently. </li><li>Collaborate with partners across business groups with unique business processes, data sets, and challenges finding the common ground needed to build the cross-asset class capabilities into MEG. </li><li>A passion for development with the ability to navigate MEG’s metadata and statistical databases. </li><li>You have good verbal and written communication skills with the ability to communicate effectively to groups. </li><li>You can work towards the ability to operate independently while maintaining focus on the overall project goal. </li><li>You will work to refine problem solving skills with the ability to determine root cause and clearly communicate the problem statement and solution. </li><li>Proficient in Scrum methodology and practices (backlog management, sprint planning, retrospectives) </li><li>You can work to build experience writing user acceptance tests and ensuring 100% use case coverage. </li><li>You can work to become familiar with micro-services architecture, MEG’s applications and data APIs to aid in your development. </li><li>You will work towards build relationships with key business partners and quickly establish trust to ensure effective delivery. </li><li>You will learn to challenge assumptions from all interested parties to ensure the best product can be delivered. </li></ul>The Value You Deliver<ul><li>Gathering and incorporating feedback from management to aid in the design and development of the MEG products. </li><li>Help define and implement the product vision, incorporating the best of both existing technologies with an eye to how future technologies can help advance the product. </li><li>Bringing your unique perspectives and expertise to this role to make MEG an outstanding infrastructure solutions organization for MEG’s partners and clients. </li></ul>The Team MEG is a dynamic group that handles middleware development and engineering solutions for Fidelity spanning all business units. MEG develops services, frameworks and sites to manage these solutions or provide monitor applications of these solutions for our customers. MEG will become the cross-business unit solutions group for middleware and infrastructure development for Fidelity and FIT.<h4>Company Overview</h4>Fidelity TalentSource is the in-house temporary staffing provider for Fidelity Investments, one of the largest and most diversified global financial services firms in the industry. We welcome individuals from all backgrounds, including technology and customer service, to fill assignments across Fidelity’s U.S.-based regional and investor center locations. If you would like to experience Fidelity’s supportive and collaborative culture while expanding your skill set and developing your professional network, consider a role with Fidelity TalentSource. Apply today at&nbsp;FTSJobs.com.We believe that the most effective way to attract, develop and retain a diverse workforce is to build an enduring culture of inclusion and belonging. Fidelity TalentSource will reasonably accommodate applicants with disabilities who need adjustments to participate in the application or interview process. To initiate a request for an accommodation, please contact our HR team at HR@ ftsjobs.com.<h4>Information about Fidelity investments</h4>At Fidelity Investments, our customers are at the heart of everything we do. As a privately held company with a rich 75-year history, our mission has remained the same since our founding: to strengthen the financial well-being of our clients. We help people invest and plan for their future. We assist companies and non-profit organizations in delivering benefits to their employees. And we provide institutions and independent advisors with investment and technology solutions to help invest their own clients’ money. For information about working at Fidelity, visit FidelityCareers.com.Fidelity TalentSource’s working model blends the best of working offsite with maximizing time together in person to meet associate and business needs. Currently, most hybrid roles require associates to work onsite all business days of one assigned week per four-week period (beginning in September 2024, the requirement will be two full assigned weeks).Fidelity Investments and Fidelity TalentSource are equal opportunity employers.

Fidelity TalentSource

Java Full Stack Engineer

Fidelity TalentSource is your destination for discovering your next temporary role at Fidelity Investments. We are currently sourcing for a Senior Software Engineer to work in Merrimack, NH or Westlake, TX! Fidelity Event Notifications System (FENS) is looking for a highly motivated Senior Software Engineer to craft, develop and implement Distributed applications in an agile development environment. This role requires the person to be practicing the Agile methodology as an engineering squad member. Squad member assignments will be Agile based tasks and/or stories to deliver what is required as part of the product team backlog refinement. This squad member will be responsible to build, design, develop and maintain the technical solutions. This is a hands-on technology professional role where you will closely collaborate with the Squad Lead and other members of the squad to deliver quality solutions to support the business needs.The Value You Deliver<ul><li>Designing, Building, and supporting critically important applications and APIs to provide the best customer experience </li><li>Deliver messaging solutions and Services functionality for Institutional, Retail and Fidelity customers </li><li>Exploring new technology trends and using them to simplify our data ecosystem </li><li>Driving Innovation and leading the team to implement solutions with future thinking </li><li>Collaborating with internal and external teams to deliver technology solutions for the business needs </li><li>Resolving technical roadblocks to the team and mitigating potential risks </li><li>Delivering system automation by setting up continuous integration/continuous delivery pipelines </li><li>Acting as a technical mentor to the team and bringing them up to speed on latest data technologies and promoting continuous learning. </li><li>Responsible for managing the Code reviews and Code merges for the Scrum team. </li></ul>The Expertise and Skills You Bring<ul><li>BS Computer Science or equivalent is required; MS Computer Science or equivalent is preferred. </li><li>Expert-level knowledge of one or more of the following messaging technologies: KAFKA, MQ, TIBCO EMS </li><li>8+ years’ experience developing and using Java, J2EE, Spring Framework, Multi-threading, Object Oriented Design, Secure REST APIs </li><li>Proven understating of data architecture patterns such as Lambda, Event driven Architecture, Data as a Service, Microservice etc. </li><li>4+ years’ experience with all major AWS Services, particularly EKS, EC2, Lambda, S3, Kinesis, SNS, SQS, ECS, Cloud Formation, Cloud Security </li><li>Experience with DevOps, Continuous Integration and Continuous Delivery (Maven, Jenkins, Stash, Ansible, Docker) </li><li>Proven experience in Agile methodologies (Kanban and SCRUM) </li><li>Relational (Oracle, DB2) and NoSQL databases (DynamoDB, Elastic search, Graph DB) </li><li>Excellent collaboration skills to work with multiple teams in the organization </li><li>Ability to understand and adopt to changing business priorities and technology advancements </li><li>Solid understanding and technology trends in implementing of Big data ecosystem </li><li>Strong team player and able to mentor junior team members </li><li>Strong experience in problem solving analysis, owning the problem, designing the solution, and leading the change. </li></ul>The Team Fidelity Electronic Notifications System (FENS) team is responsible for systems design, development and maintenance of Fidelity’s alerts systems. FENS group provides real-time &amp; batch alerts for Retail, Institutional, workplace Investing and Capital markets customers.<h4>Company Overview</h4>Fidelity TalentSource is the in-house temporary staffing provider for Fidelity Investments, one of the largest and most diversified global financial services firms in the industry. We welcome individuals from all backgrounds, including technology and customer service, to fill assignments across Fidelity’s U.S.-based regional and investor center locations. If you would like to experience Fidelity’s supportive and collaborative culture while expanding your skill set and developing your professional network, consider a role with Fidelity TalentSource. Apply today at&nbsp;FTSJobs.com.We believe that the most effective way to attract, develop and retain a diverse workforce is to build an enduring culture of inclusion and belonging. Fidelity TalentSource will reasonably accommodate applicants with disabilities who need adjustments to participate in the application or interview process. To initiate a request for an accommodation, please contact our HR team at HR@ ftsjobs.com.<h4>Information about Fidelity investments</h4>At Fidelity Investments, our customers are at the heart of everything we do. As a privately held company with a rich 75-year history, our mission has remained the same since our founding: to strengthen the financial well-being of our clients. We help people invest and plan for their future. We assist companies and non-profit organizations in delivering benefits to their employees. And we provide institutions and independent advisors with investment and technology solutions to help invest their own clients’ money. For information about working at Fidelity, visit FidelityCareers.com.Fidelity TalentSource’s working model blends the best of working offsite with maximizing time together in person to meet associate and business needs. Currently, most hybrid roles require associates to work onsite all business days of one assigned week per four-week period (beginning in September 2024, the requirement will be two full assigned weeks).Fidelity Investments and Fidelity TalentSource are equal opportunity employers.

Senior Software Engineer (Event Messaging Platform)

Salary Range:&nbsp;&nbsp;$105,267.00&nbsp;(Min.) -&nbsp;$139,478.00&nbsp;(Mid.) -&nbsp;$173,689.00&nbsp;(Max.)Established in 1997, L.A. Care Health Plan is an independent public agency created by the state of California to provide health coverage to low-income Los Angeles County residents. We are the nation’s largest publicly operated health plan. Serving more than 2 million members, we make sure our members get the right care at the right place at the right time. Mission: L.A. Care’s mission is to provide access to quality health care for Los Angeles County's vulnerable and low-income communities and residents and to support the safety net required to achieve that purpose. <h4>Job Summary</h4>The Enterprise Architect Integration Engineer II is responsible for developing standards, tools and governance for capturing, storing and delivering enterprise data. This position is responsible to design and build L.A. Care's Data API work and/or SOA architecture. Working closely with the business, application and Information Technology (I.T.) infrastructure teams, the Enterprise Architect Integration Engineer II will analyze business and technical problems and develop the appropriate the framework to incorporate Master Data, event driven and batch processing entities to the Enterprise Data Management Cloud (EDMC) and/or master service bus.<h4>Duties</h4>Develop integration and architecture to meet the business needs of the company by working closely with key stakeholders and partners.Integrate I.T. Solutions into a common framework. Enforce standards around systems technology stacks and mechanisms for governing cloud-based infrastructure.Support in-house development teams to implement solutions. Responsible for providing technical and management guidance to all departments and works closely with development teams to ensure compliance. Supports the creation of roadmap documents, architectural documents, process documents, standards documents and governance documents. Collaborates with program-level architects across the organization on the details of the systems architecture for their particular domain.Work closely with I.T. functional areas to identify and resolve integration and workflow considerations and issues. Responsible for assisting with the overall system design and architecture. Responsible for providing EA support to the Development department and Enterprise Architecture team. Work with other architects around business, data, systems, and security needs and how applications best participate in the overall enterprise architecture.Performs other duties as assigned.<h4>Duties Continued</h4><h4>Education Required</h4>Bachelor's Degree in Computer Science or Related FieldIn lieu of degree, equivalent education and/or experience may be considered.<h4>Education Preferred</h4><h4>Experience</h4>Required:At least 5 years of experience in design and implementation of data applications and integrations, using modern development tools, i.e. Java JSP applications or ORACLE/PL/SQL, or SQL Server Batch processes or similar technologies. At least 5 years of experience designing and building solutions with SOAP, Rest API, Micro service development suites, i.e.&nbsp; Informatica IDMC/IICS, Mulesoft, or ORACLE SOA suite (ESB/BPEL/SOA/BAM).Strong experience of managing advanced technical resources.Demonstrated experience designing and building enterprise level canonical models.Experience in multiple database platforms, including NoSQL, SQL Server and/or Oracle, Snowflake, Red Shift, Data Bricks, etc.Experience working with end users to gather requirements and build technical solutions from concept to implementation.Preferred:Previous healthcare experience.<h4>Skills</h4>Required:Strong understanding of process and queueing design patterns.Strong problem-solving and analytical skills.Excellent verbal and written communication skills with the ability to discuss and understand HealthCare business partners across all operations.&nbsp; Must be well organized, flexible, motivated and enjoy the challenges of supporting a complex, changing environment, with attention to detail, at times under pressure, remaining flexible, proactive, resourceful and efficient. Ability to build relationships throughout business units, our customers, and their teams to ensure that the services provided are of exceptional quality.<h4>Licenses/Certifications Required</h4><h4>Licenses/Certifications Preferred</h4><h4>Required Training</h4><h4>Physical Requirements</h4>Light<h4>Additional Information</h4>Department Specifics:IT Enterprise Architecture:Additional Duties and Responsibilities:Develop Data Integration, API Integration and Application Integration architecture to meet the business needs of the company by working closely with key stakeholders and partners.Integrate I.T. Solutions into the Enterprise Data Management Cloud framework.IT Solutions Delivery:Additional Duties and Responsibilities:Develop SOA integration and Business Workflow architecture to meet the business needs of the company by working closely with key stakeholders and partners.Integrate common SOA, BPEL, BAM, OSB, B2B, SQL, Core JAVA and Service Gateway Standards.Salary Range Disclaimer: The expected pay range is based on many factors such as geography, experience, education, and the market.&nbsp; The range is subject to change.L.A. Care offers&nbsp;a wide range of benefits including<ul><li>Paid Time Off (PTO)</li><li>Tuition Reimbursement</li><li>Retirement Plans</li><li>Medical, Dental and Vision</li><li>Wellness Program</li><li>Volunteer Time Off (VTO)</li></ul> Nearest Major Market: Los Angeles

L.A. Care Health Plan

Enterprise Architect Integration Engineer II

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.Pay Range$116,600.00-$175,000.00 AnnualThis is the base salary pay range that an applicant can expect to make upon hire. &nbsp; Pay within this range will vary based upon relevant experience, skills, and education among other factors. In addition, this position is eligible for an incentive bonus.&nbsp;The Senior Cyber Security Engineer will design, implement and support a variety of complex projects supporting enterprise security solutions for network infrastructure, engineering environments, manufacturing plant floor, and other areas of JM.This is a fully remote position, candidates must live within the US and be willing to travel to our corporate headquarters in Denver, CO on occasion.Security Technology Strategy and Architecture (10%)<ul><li>Advise on best practices, strategies, architecture, and design related to security technologies.</li><li>Assist with security policy and procedure documentation and diagramming.</li><li>Assist with the management, implementation, and support of secure mobility architecture.</li></ul>Security Project Management (20%)<ul><li>Utilize project management skills to ensure the timeliness of security projects related to production line firewalls, internet services, and security tool deployment.</li><li>Operationalizing tools and performing Incident Response</li></ul>Operational Security Management (30%)<ul><li>Support operational security management, including:<ul><li>Experienced in utilizing offensive security and pentesting tools</li><li>SOAR Automation</li><li>Client and security agent management</li><li>Vulnerability scanning remediation</li></ul></li></ul>Technical Mentoring (10%)<ul><li>Train and mentor security engineering personnel on security architecture, new technology, and incident troubleshooting.</li></ul>Incident Handling and Forensic Analysis (30%)<ul><li>Oversee security incident handling by executing the following or related tasks:<ul><li>Strong Understanding of Incident Management framework and process</li><li>Review security events and perform analysis on detected or escalated events.</li><li>Identify and react to network attacks, viruses, and intrusions.</li><li>Develop and coordinate remediation plans if compromises occur.</li><li>Provide forensic analysis of security violations and report investigation details to legal, HR, and IT leadership. Analysis may be complex in nature, and this role would manage the effort with little supervision.</li></ul></li></ul>What You Bring to the Team: <ul><li>Bachelor’s degree with a minimum of 7 years of IT experience and a minimum of 4 years of experience in Network and/or Security areas.</li><li>At least one certification such as CISSP, CEH, SANS GCIH, GIAC, CCSP, CISM.</li><li>Demonstrated knowledge of switch, router, firewall, and Cisco wireless technologies. Experience consistent with a CCNA certification.</li><li>Significant expertise in web content filtering, with a preference for Cisco technologies.</li><li>Understanding of XDR/EDR Solutions with ability to write KQL queries</li><li>Expert expertise in IDS/IPS.</li><li>Proven expertise in VPN (site-to-site, client, and web-based).</li><li>Working knowledge of authentication systems such as Radius and Cisco ACS.</li><li>Fundamental load balancing experience with Cisco ACE or F5 preferred.</li><li>Proven expertise in Security Information and Event Management (SIEM) systems, .</li><li>Working knowledge of web proxies.</li><li>Excellent skills in web application firewalls.</li><li>Expert knowledge of best forensic practices for devices and networks.</li><li>Expert ability to design and integrate complex security solutions that improve the efficiency and security of the corporate network infrastructure.</li><li>Proven knowledge of high-performance, secure data centers.</li><li>Fundamental knowledge of manufacturing systems, SCADA, and process control networks preferred.</li><li>Strong understanding of web application design, function, and secure software development lifecycles preferred</li><li>Proven expertise in SSL certificates and Public Key Infrastructure</li><li>Experience and willingness to be on an on-call rotation</li><li>Ability to handle sensitive and confidential information</li><li>Moderate travel required (11–29 days per year)</li><li>Work environment is typical of an office setting; however, must be able to travel to manufacturing facilities globally for projects</li></ul>Required Skills:<ul><li>Proficiency with Microsoft Sentinel.</li><li>Proficiency with KQL, SPL query languages</li><li>Experience with offensive measures</li><li>Understanding of the MITRE ATT&amp;CK framework, MITRE DEFEND, kill chain, and attack methodology</li></ul>Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Senior Cybersecurity Engineer

Automation Engineer This opening is with Howmet Aerospace – a world leader in investment casting of super-alloys, aluminum, and titanium primarily for jet aircraft and industrial gas turbine markets.&nbsp;For more information, visit&nbsp;<a>www.howmet.com</a>. Follow @howmet:&nbsp;Twitter,&nbsp;Instagram,&nbsp;Facebook,&nbsp;LinkedIn&nbsp;and&nbsp;YouTube. Howmet has challenging opportunities for individuals who are excited to engage with us in growing our business. Join us where you will be part of a dedicated team to manufacture high tech products, safely, accurately, and efficiently, you will perform a variety of hands-on operations in accordance with standardized processes within customer specifications. Job Summary:&nbsp;This position will be instrumental in identifying new manufacturing technology. Responsibilities include working with vendors and design teams, follow through during the build phase, and implementation of&nbsp;this equipment in production before handing it off to the manufacturing team. Essential Functions &amp; Responsibilities: <ul><li>Design/maintenance of robotic programs used throughout HHC Monoshell/Wax manufacturing process.</li><li>Design and program management of fixtures used within the robotic processes.</li><li>Support/train manufacturing operators on the use of automation within the process.</li><li>Documentation of all changes to production programs for future correlation to downstream process outputs.</li><li>Determination of key input variables within the automation process to ensure that process is robust against minor variations in casting dimensions.</li><li>Determination/implementation of key output variables to validate that critical functions within a program/piece have completed successfully before running additional product.</li><li>Determination of key input variables to validate sand towers align with Process Owner distribution/uniformity levels</li><li>Support Manufacturing/Process owner in cross functional scrap initiatives</li></ul> Other duties as assigned. Basic Qualifications: <ul><li>Bachelor’s Degree in Mechanical, Electrical, or Industrial/Manufacturing Engineering from an accredited institution required.</li><li>Must be able to provide documentation in the original form establishing both your identity and your employment eligibility in the U.S.</li><li>This position entails access to export-controlled items you must be able to lawfully obtain access to such items.</li></ul> Preferred Qualifications: <ul><li>3+ years' experience working with controls/programming robotics.</li><li>Experience with Motoman and/or Fanuc robots</li><li>Offline programming experience.</li><li>Familiarity with fixture design for implementation in a robotic cell is beneficial.</li><li>Prior exposure / knowledge of statistical analysis</li><li>Green Belt certification in Six Sigma is preferred.</li></ul> About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

Automation Engineer

Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s sales for 2021 approximated $5 billion. The Company’s primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With nearly 1,150 granted and pending patents, the Company’s differentiated technologies promote more fuel efficiency for aircraft and commercial transportation. The Howmet engines business produces world-class aerospace and industrial gas turbine engine&nbsp;components, including investment castings, fasteners, rings, and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components. Follow:&nbsp;<a>LinkedIn</a>,&nbsp;<a>Twitter</a>,&nbsp;<a>Instagram</a>,&nbsp;<a>Facebook</a>, and&nbsp;<a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate based upon race, religion, color, national origin, gender, sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> Job Summary: The Quality Engineer provides leadership and guidance to the organization acting as a change agent to implement process improvement across the organization in the achievement of an operational excellence environment; assure the quality of product produced and conformance to the applicable customer and internal specifications, while supporting corporate objectives; support the administration of quality manuals, continuous improvement initiatives and interaction with business center personnel on quality initiatives; root cause analysis and corrective/preventative action determined as appropriate; resolve manufacturing and shipment issues relative to customer specifications. Essential Functions &amp; Job Responsibilities: <ul><li>Maintain compliance of products in manufacturing to specific customer purchase orders, blueprints, and specifications</li><li>Maintain lines of communication with customers and suppliers.&nbsp; This includes verbal and written correspondence and personal visits when required.</li><li>Provide technical support to Engineering, Manufacturing and Sales</li><li>Coordinate review of nonconforming material and process customer concessions for possible acceptance</li><li>Develop, maintain and implement quality systems procedures and work instructions in compliance to customer and regulatory requirements.</li><li>Corrective / Preventive action leader and team player</li><li>Standardize metrics and best practices within facility.</li><li>Internal audit program leader</li><li>Purchase order and specification review leader focused on negotiation of customer requirements, advanced product quality planning and translation of requirements to operator level.</li><li>Customer advocate (Voice of the customer)</li><li>Process improvement leader focused on review, disposition and elimination of material review, concessions, corrective / preventive actions and escapes.</li><li>Ensure customer verification is complete (i.e., FAIR) and submitted to the customer.</li><li>Supplier Quality</li><li>Knowledge and experience with quality tools, such as CAPA, six sigma, lean manufacturing, PPAP, FMEA, problem solving techniques, and root cause analysis.&nbsp;</li><li>Participate in plant level APQP and NPI activities.</li><li>Lead, document, and track process and job specific PFMEA</li><li>Responsible for coordinating suppliers and verifying quality standards in accordance with industry and customer requirements.&nbsp; This includes commodities and outplant operations.</li><li>Assist in the development and implementation of supplier management programs.</li><li>Identify technical problems as well as cost reductions with Suppliers.</li><li>Manage Supplier corrective actions.</li><li>Conduct Supplier audits to assure compliance to quality system, processes, and schedules.</li><li>Report supplier performance and quality to management</li><li>Performs other duties as assigned.</li></ul> Skills &amp; Abilities <ul><li>Ability to write reports, business correspondence, and create project plans.&nbsp;</li><li>Ability to effectively present information and respond to questions from the customer and/or management.</li><li>Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.</li></ul> Basic Qualifications <ul><li>Bachelor's degree in Engineering from an accredited institution.</li><li>Minimum 3 years quality/engineering experience.</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li><li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li></ul> Preferred Qualifications <ul><li>Experience&nbsp;in a ISO9000 or AS9100 Manufacturing environment</li><li>Working knowledge of PFMEA</li><li>Certified AS9100 Auditor</li></ul> About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Quality Engineer - HSC

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRONNeutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!SENIOR MANUFACTURING ENGINEER – MACHINING We are currently seeking a Senior Manufacturing Engineer with a focus in Machining based out of Rocket Lab's Engine Development Center (EDC) in Long Beach, CA. They will be responsible for the machining development of new products and product revisions as related to both Rutherford and Archimedes engines. They will support the Director of Manufacturing Engineering and Production organization, with deliverables required for internal leadership, board of directors and investors.(Please note: This position can be hired for 1st Shift or 2nd shift)WHAT YOU’LL GET TO DO:<ul><li>Contribute to design reviews acting as an expert in design for manufacture, design for machining, productivity, quality control, etc.</li><li>Select, procure, and install machine shop equipment along with developing maintenance/calibration plans.</li><li>Develop machining capability in-house for the Archimedes components and implement rapid iterations.</li><li>Design, develop, and implement tooling and equipment for use in a production environment where appropriate to improve quality, delivery and/or cost performance.</li><li>Responsible for continuous improvement and cost reduction projects belonging to the fabrication department.</li><li>Collaborate with other Rocket Lab machine shops for general alignment, capability, and support.</li><li>Develop and mentor less experienced engineers and machinist daily.</li></ul>YOU’LL BRING THESE QUALIFICATIONS <ul><li>Bachelor’s degree in mechanical, aerospace, or manufacturing engineering, or equivalent.</li><li>5+ years of machine shop experience.</li><li>Ability to rapidly iterate CAM programs (NX preferred) and operate 5-axis CNC equipment.</li><li>Well versed in GD&amp;T and inspection methods.</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>Working experience with capacity modeling, process mapping, Lean/Six Sigma and value stream mapping.</li><li>Experience with 3D CAD software and tooling design.</li><li>Experience machining turbomachinery and combustion device components.</li><li>Familiarity with post processing methods, AM and welding.</li></ul>ADDITIONAL REQUIREMENTS:&nbsp;<ul><li>Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.&nbsp;&nbsp;&nbsp;</li><li>Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.&nbsp;&nbsp;</li><li>Must be physically able to commute to buildings&nbsp;</li><li>Occasional exposure to dust, fumes and moderate levels of noise.&nbsp;</li><li>Availability to work long hours and weekends as needed based on test and launch schedules.&nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$95,000—$135,000 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Rocket Lab

Senior Manufacturing Engineer - Machining 

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.Pay Range$39,500.00-$50,500.00 AnnualThis is the base salary pay range that an applicant can expect to make upon hire. &nbsp; Pay within this range will vary based upon relevant experience, skills, and education among other factors.Interns thrive at JM because we give our employees the ability to do things they wouldn't be able to anywhere else. As an Engineering Intern in Waterville, OH you will work side by side with other engineering professionals and plant leadership by participating in hands on activities such as sampling, analysis, troubleshooting, and process improvements as well as be responsible for documentation and various plant initiatives.Your Day to Day: <ul><li>Provide engineering services for less complex technical problems and recommend a course of action.</li><li>Provide engineering services for more complex problems under direct guidance of higher-level engineering personnel.</li><li>Take an active part in the execution of product development projects.</li><li>Assist Sr. Engineers on technical service initiatives with sampling, analysis, troubleshooting, process improvement, and recommendations.</li><li>Develop and integrate product and process documentation ensuring consistency and accuracy.</li><li>Provide project status and update reports as required.</li><li>Involved in learning.</li></ul>What You Bring to the Team:<ul><li>Pursuing a B.S. degree in engineering (Mechanical, Chemical, Industrial or Manufacturing).</li><li>Completed at least sophomore year of undergraduate course work and enrolled in classes for Spring 2024.</li><li>Microsoft Office (Word, Excel PowerPoint, Outlook).</li><li>Ability to work in a team environment.</li></ul>Preferred Qualifications<ul><li>GPA of at least 3.0 at an accredited college or university.</li><li>Demonstrated leadership skills.</li><li>Basic understanding of production processes</li><li>Strategic and creative thinking</li><li>Solid works experience</li></ul>INTERNSHIP PROGRAMThe Johns Manville Internship Program is designed to provide challenging and fulfilling work in your area of expertise. We also offer additional opportunities from community service events, social outings, and intern seminars to allow you to give back, network, and gain a broader understanding of JM and its functions. We take a holistic approach to your development and are committed to providing valuable experience for both you and the company. At the conclusion of the summer, all interns will have the opportunity to present their achievements to functional leaders at our headquarters in Denver, Colorado. We encourage you to find out why interning with us is such a rewarding experience by checking out the internship page on our website.Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

669 Engineering Jobs in United States