field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

Assistant Professor of Instruction in Dance The Department of Theatre and Dance at The University of Texas at El Paso invites applications for a full-time, non-tenure track, renewable position of Assistant Professor of Instruction in Dance, beginning Fall 2025. The department is interested in a dynamic dance practitioner qualified to teach undergraduates different dance styles and forms and choreograph annual dance shows. As an Assistant Professor of Instruction, the selected candidate is expected to mentor students, and to be an active member of the department, serving in committees and collaborating with other units at the University, especially during special events. Responsibilities include, but are not limited to: <ul><li>Teaching a variety of dance classes from introductory to advanced levels, in the areas of contemporary and modern dance, Latine and/or Africana forms, dance pedagogy, critical dance studies, choreography and composition.</li><li>Teaching up to 4 classes per semester.</li><li>Mentoring students in academic, creative, and career planning.</li><li>Demonstrating excellence in teaching and advancing pedagogical standards.</li><li>Collaborating with all design and technical areas in the process of choreographing and organizing productions.</li><li>Contributing to the values, vision, and mission of the Dance Program, the Department of Theatre and Dance, and the University as a whole.</li><li>Performing service duties including student recruitment, curricular assessment and revision, season selection, departmental representation, etc.</li></ul> Job Requirements:<ul><li>MFA or PhD in Dance or in a related field with extensive dance focus.</li><li>Minimum three years of teaching in the field of dance in Higher Education.</li><li>Documented professional experience as a choreographer and performer.</li></ul> PREFERRED QUALIFICATIONS: <ul><li>Experience in curriculum development.</li><li>Experience in recruitment, serving on committees, and contributing to departmental service in Higher Education.</li></ul> Additional Information: Salary: $50,000-$56,000 for a nine-month appointment, dependent on qualifications and experience. The initial salary is competitive, based on qualifications and experience, and comes with excellent fringe benefits. Hiring decisions are based on budget approval. In keeping with its access, excellence, and impact mission, The University of Texas at El Paso is committed to an open, diverse, and inclusive learning and working environment that honors the talents, respects the differences, and nurtures the growth and development of all. We seek to attract faculty and staff who share our commitment. The University of Texas at El Paso is an Equal Opportunity/Affirmative Action employer. The University does not discriminate on the basis of race, color, national origin, sex, religion, age, disability, genetic information, veteran status, sexual orientation, or gender identity in employment or the provision of services in accordance with state and federal law. Discrimination on the basis of sex includes an employee's or prospective employee's right to be free from sexual harassment under Title IX of the Higher Education Amendments of 1972. Inquiries-including the filing of a Formal Complaint or reporting an incident-about the application of Title IX may be referred to the Title IX Coordinator, who can be reached by phone at (915) 747-8358, by email at <a href="https://apptrkr.com/get_redirect.php?id=5738426&amp;targetURL=mailto:titleix@utep.edu" target="_blank">titleix@utep.edu</a>, or by mail at 500 W. University Ave., El Paso, TX, Kelly Hall, Room 312. For accommodation information for employees and applicants with disabilities, please contact UTEP's Equal Opportunity Office at <a href="https://apptrkr.com/get_redirect.php?id=5738426&amp;targetURL=mailto:eoaa@utep.edu" target="_blank">eoaa@utep.edu</a>. To apply, visit <a href="https://apptrkr.com/5738426" target="_blank">http://utep.interviewexchange.com/jobofferdetails.jsp?JOBID=182265</a> jeid-4452c5bd6742d648973e90cff8b30a8e

The University of Texas at El Paso

Assistant Professor of Instruction in Dance

USRC's greatest strength in being a leader in the dialysis industry is our ability to recognize and celebrate the differences in our diverse workforce. We strongly believe in recruiting top talent and creating a diverse and inclusive work climate and culture at all levels of our organization. The Clinical Coordinator is responsible for assisting with management and operation of clinic. This position assumes full responsibility for the dialysis clinic in the absence of the Administrator.Growth:<ul><li> Assist with clinical and operational processes to improve patient health and minimize hospitalizations and missed treatments.</li><li> Assist with planning/coordinating patient scheduling to assure timely acceptance of patients and effective staffing levels.</li><li> Demonstrate effective use of supplies and staff labor hours. </li><li> Responsible for updating all logs and ensuring that dialysis run sheets and logs are sent to billing.</li><li> Perform duties as assigned to meet the patient care or operational needs of the clinic.</li></ul>Outcomes:<ul><li> Coordinate the functions of all departments and develop standards and methods of measuring patient care services, including a chronological record of services provided to patients as required by the ESRD Network Coordinating Council and Medicare.</li><li> Work with Administrator to maintain chronological, thorough, and appropriate documentation in the patient record of all treatments, activities, and communication with the patient, physician, and other healthcare professionals.</li><li> Promote quality management program through education and involvement of staff and patients in outcomes as well as overall responsibility to achieve corporate goals for quality.</li><li> Assist with program's target goals for patient outcomes in accordance with quality patient care and Company goals.</li><li> Review all incident reports; make recommendations and take action relative to incidents as appropriate; report at monthly QAPI meeting as delegated by Administrator or Management.</li></ul>Operational Readiness:<ul><li> Knowledge of and remain current with federal, state, local laws and regulations, including health care professionals practice act requirements. </li><li> Work with Administrator to assure clinic is in compliance with all applicable federal, state, and local laws and regulations.</li><li> Assist Administrator with development, implementation and follow up of Corrective Action Plans required for internal and external surveys. </li><li> May assume Charge Nurse's responsibilities as needed.</li><li> May fulfill responsibility of facility Alternate CEO as delegated by Governing Body. </li><li> Conduct and/or participate in both formal and informal meetings with the governing body, Regional Director, Medical Director and the staff as delegated. Assure that appropriate staff meetings, in-service education meetings, and team patient care planning meetings are held monthly as delegated. Assure that Quality Assessment &amp; Performance Improvement Program is current at all times as delegated.</li><li> Establish, maintain, and submit all required records and reports concerning staff, patients, and the operational affairs of the center if delegated by Administrator.</li><li> Continuously monitor to ensure that a safe and sanitary physical environment is maintained throughout the facility; that all equipment is maintained and functions properly; and that adequate and appropriate inventory levels of all supplies are available and used correctly.</li><li> Oversee the maintenance of equipment and supplies to meet current laws and regulations.</li><li> Responds to all emergencies in clinic. Familiar with emergency equipment and all emergency operational procedures.</li><li> Supervise the maintenance of equipment, building areas occupied by the center and other property belonging to the center.</li></ul>Partnerships:<ul><li> Maintain collaborative working relationship with Medical Director and physicians.</li><li> Establish and maintain a positive relationship with all Administrators, area hospitals, agencies, vendors and the community.</li><li> Actively promote GUEST customer service standards; develop effective relationships at all levels of the organization.</li><li> Respond effectively to inquiries or complaints.</li></ul>Staff Development: <ul><li> Ensure all staff meet required qualifications for position held and perform duties within limitations established by and in accordance with company policy/procedures, health care professionals practice acts, applicable state and federal laws and regulations.</li><li> Serves as a resource/subject matter expert for patient needs and concerns, staff education and in-service sessions as necessary.</li><li> Assists with recruitment, training, development, and supervision of all personnel.</li><li> Assists with maintaining effective personnel management and employee relations, including evaluating the performance of all personnel and counseling employees.</li><li> Uphold management goals of corporation by leading staff in team concepts and promoting a team effort.</li><li> Effectively communicate expectations; accept accountability and hold others accountable for performance.</li></ul>

U.S. Renal Care

Dialysis Clinical Coordinator - RN Chronic In-center

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

Dialysis Patient Care Technician

JOB SUMMARY Works under minimal supervision to plan, fabricate, and maintain pattern dies, sprue dies, gauges, or ancillary items of extreme complexity. All types of precision machine shop equipment, hand tools, and measuring device tools are used in extremely complex tasks. &nbsp;Independent judgment and skill are frequently required. Tool Maintenance ‘A’ may not move for two (2) years unless movement is a promotion within the department. ESSENTIAL FUNCTIONS <ul><li>Maintains, Fabricates and Manufactures dies, patterns, and gauges of extreme complexity.</li><li>Using Computers (entering information, etc.)</li><li>Must be able to read and interpret Product Criteria (PC) and Activity Instructions (AI).</li><li>Must be able to function as a member of a team and be able to work under general supervision.</li><li>Must be able to maintain expected quality levels.</li><li>Comply with all site required policies and procedures including but not limited to:&nbsp; EHS, Quality, Code of Conduct, and the Wichita Falls Employee Handbook.</li></ul> JOB RESPONSIBILITIES 1. Analyze machining requirements and mentally determines the necessary procedure to facilitate the task. 2. &nbsp;Performs all set-ups of equipment and molds utilizing knowledge of machine shop practices and procedures as well as a working knowledge of tool and die making (mold making) equipment and techniques. 3. &nbsp;Inspects dies for conformance to established specifications. 4. &nbsp;Performs complex machining using horizontal lathes, cnc, vertical mills, and surface grinders. 5. &nbsp;Sets up, creates, and sharpens drills, tool bits, and cutting tools. 6. &nbsp;Assists in training lower level toolmakers. 7. &nbsp;Plans the repair or modification of complex molds and repairs or modifies as required. 8. &nbsp;Repairs complex damaged dies, gauges, and fixtures per requests from production. 9. &nbsp;Follows tool work order requests per engineering and manufacturing instructions. 10. &nbsp;Manufactures fixtures and tools from rough sketches or complex electronic models. 11. &nbsp;Maintains records, drawings, electronic files, or other paperwork as required to complete task at hand. 12. &nbsp;Maintains work area in a clean, orderly, efficient, and safe condition. 13. &nbsp;Performs precise machining or salvage operations on certain castings that cannot be machined by other departments (finishing, grinding, etc.). 14. Performs other duties as required. 15. Complies with all EHS rules related to the work environment. SKILLS AND ABILITIES <ul><li>Must be able to follow verbal and written instructions and think logically to analyze situations. Must have a well-developed sense of spatial relations.</li><li>Ability to work quickly, safely, and accurately to meet schedules.</li><li>Must be manually adept.</li><li>Ability to communicate by oral/written means to convey results of tool rework.</li><li>Must have an excellent working knowledge of machines, how to set-up and operate complex equipment, and an understanding of trigonometry, geometry, and general mathematics.</li><li>Ability to read and work to machining / detail blueprints and electronic models.</li><li>Must be able to master brazing and silver solder techniques for tool repair.</li><li>Must have an excellent working knowledge of tool steel heat treat parameters.</li><li>Work requires attention to safety practices and procedures around machinery and precise, rotating equipment and use of good work habits.</li><li>&nbsp;Must have mechanical ability.</li><li>Must operate precision equipment and measuring devices to collect accurate and meaningful data for the task at hand.</li></ul> ENVIRONMENTAL HEALTH AND SAFETY RESPONSIBILITES <ul><li>Comply with all department, facility, corporate and regulatory EHS regulations</li><li>Wear all required personal protective equipment (PPE). Requires wearing safety glasses, earplugs, gloves, and Metatarsal shoes.</li><li>Report all job-related illness and injuries (Per Employee Handbook).</li><li>Report all safety, health, and environmental concerns to your supervisor in a timely manner.</li><li>Attend all EHS training.</li></ul> PHYSICAL DEMANDS/EQUIPMENT USED <ul><li>Physical Demands:</li></ul> The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DICAL SURVEILLANCE REQUIREMENTS Employee is required to execute the following: <ul><li>Push pull and twist.</li><li>Floor-to-waist lift and carry, lifting and carrying to the waist high level, carrying items with two hands.</li><li>Gripping and pinching</li><li>Reaching near, far, and overhead</li><li>Hand/Arm Vibration</li><li>Be able to climb ladders and stairs</li><li>Heavy lifting &gt; 50 lbs.</li><li>Good manual dexterity to operate computer equipment and precision measuring instruments.</li><li>Position may require more than eight hours daily and more than five days weekly to complete work assignments.</li><li>Will occasionally be working around large and sometimes heavy fixtures, patterns, and gauges.</li><li>Squatting/crouching/bending when retrieving stored items from lower shelves and file cabinets, moving equipment / product inspections, etc.</li><li>Clean work areas and maintain a clean work environment; perform 5S cleaning activities as required.</li></ul><ul><li>Training:</li></ul><ul><li>Prefer advanced technical training through apprenticeship and/or on the job training in tool and die making (mold making) with a minimum of 5 years actual prior experience in a facility performing multi-faceted machining functions.</li></ul><ul><li>Equipment Used:</li></ul><ul><li>Performs complex machining using horizontal lathes, vertical mills, and surface grinders.</li><li>Uses a variety of hand and power tools, precision inspection equipment such as comparators, calipers, micrometers, height gauges, and establishes surface plate set-ups.</li></ul><ul><li>Work Environment: (Chemical and Physical Exposures)</li></ul><ul><li>Air-conditioned area; exposed to slight degree of noise, oil, dust, fumes, chemicals, nickel, heat or cold.</li></ul> MEDICAL SURVEILLANCE REQUIREMENTS Must pass Jaeger 2 eye exam. (requires color) BASIC QUALIFICATIONS: <ul><li>High School Diploma or GED from an accredited institution.</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul> PREFERRED QUALIFICATIONS: <ul><li>Background in a progression towards learning tool and die making (mold making) or similar field.</li><li>Prefer at least five years experience with horizontal lathes, vertical mills, CNC mills, EDM machines and surface grinders; well versed in speeds / feeds, cutting tools and materials.</li><li>Prior data collection and organization experience is preferred.</li><li>Extensive background in tool and die making (mold making) or similar field.</li><li>Intermediate computer experience with Master Cam software and the interaction with machining centers.</li><li>Ability and willingness to learn new machining and/or inspection methods and equipment.</li></ul> About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

TOOL MAINTENANCE A

Description - External Howmet Aerospace’s Wichita Falls, TX facility has&nbsp;openings for Foundry Service Operator/Mold Handlers. Howmet is a world leader in the investment casting industry and is a leading supplier of superalloys, aluminum, and titanium components for aerospace, automotive, and commercial transportation applications.&nbsp; Our Wichita Falls location is on the front edge of the rapid growth in the aerospace and turbine industries.&nbsp;For more information, visit&nbsp;<a>www.howmet.com</a>. Follow @howmet:&nbsp;Twitter,&nbsp;Instagram,&nbsp;Facebook,&nbsp;LinkedIn&nbsp;and&nbsp;YouTube. Must be able to work rotating shifts.&nbsp; This Opening will be on a 7:00 p.m. to 7:00 a.m. shift .&nbsp; Training may take place on days. (Rotating shifts work 2 on 2 off, 3 on 2 off, 2 on 3 off) JOB SUMMARY Works under general supervision and the direction of a caster to remove molds from the preheat furnace, properly position in timely manner for casting, perform wrap application, dewax, repair and mold inspect, and perform all post-cast operations specified. ESSENTIAL FUNCTIONS <ul><li>Using Computers (entering information, etc.)</li><li>Must be able to read and interpret Product Criteria (PC) and Activity Instructions (AI).</li><li>Must be able to function as a member of a team and be able to work under general supervision.</li><li>Must be able to maintain expected quality levels.</li><li>Comply with all site required policies and procedures including but not limited to:&nbsp; EHS, Quality, Code of Conduct and the Wichita Falls Employee Handbook.</li></ul> JOB RESPONSIBILITIES <ul><li>Read all available instructions and assist caster to cast molds in accordance with established techniques and specific instructions on the Product Criteria, Mold Sheets, or Activity Instructions.</li><li>Requires concentration for short periods of time when assisting in the acquisition of the proper alloy, checks preheat temperatures, handles the molds from the preheat furnace and again after casting, and accomplishes all specific post-cast operations (Mold hot topping, exothermic application and vermiculite encapsulation).</li><li>Particularly responsible for proper mold positioning, lower chamber cleaning, and the control of variables affecting solidification and mold cooling.</li><li>Moves empty, hot furnace trays, changes and cleans floor gaskets, performs heavy housekeeping required in department, and assists in minor equipment maintenance.</li><li>Notifies caster of any torn wraps, bumped or leaking molds.</li><li>Periodically required to load ovens.</li><li>Keep updated on new methods on improvements.</li><li>Must follow all safety practices and procedures.</li><li>Rotates through each job duty as required.</li><li>Locates scheduled work, moves trucks to proper work station.</li><li>Ensures molds are kept clean in each area.</li><li>Seals molds at dewax or mold inspection with either ceramic disk or rubber cap.</li><li>Monitors operation of equipment and temperature controls.</li><li>Must follow work instructions, SOP's, and activity instructions that govern each job task.</li><li>Inspects and repairs molds.</li><li>Prepares solutions and maintains supplies.</li><li>Cuts required kaowool and roll board.</li><li>Wraps molds per process releases/product criteria.</li><li>Must be able to operate the required piece of mobile equipment for this area.</li><li>Machines and work area are to be kept clean and in orderly condition.&nbsp; Supervisor is to be notified immediately of equipment or machinery malfunctions.</li><li>Completes necessary paperwork as required.</li><li>Verifies mold counts and paperwork correctness on lot travelers, or serial numbers at each operation.</li><li>Loads molds in preheat oven.</li><li>Performs other duties as required.</li><li>Complies with all EHS rules related to the work environment.</li><li>Works overtime when needed</li></ul> ENVIRONMENTAL HEALTH AND SAFETY RESPONSIBILITES Comply with all department, facility, corporate and regulatory EHS regulations Wear all required personal protective equipment (PPE).&nbsp;Requires Metatarsal Pull up Boots, Hearing protection, Hard Hats, Flame retardant clothing, Safety Glasses, gloves and Aluminized spats. Report all job-related illness and injuries (Per Employee Handbook). Report all safety, health and environmental concerns to your supervisor in a timely manner. Attend all EHS training. Physical Demands/Equipment Used Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilites to perform essential functions.&nbsp; Employee is required to execute the following: Considerable physical effort is required when loading alloy. Reach for items nearby, far and overhead. Fine manipulation, using a keyboard and mouse. Lifting and carrying to the waist-to-chest high level, floor to waist and chest to overhead. Gripping Pinching and Handling. Climb Stairs and Ladders. Crawl, squat, balance, and sustain bending. Finger Press and tolerate hand/arm vibration. Be able to carry with one hand. Pushing, pulling and twisting. Be able to carry items with two hands. Moderate lifting from 25 lbs to 50 lbs. Requires almost constant standing and sufficient strength to lift, handle and transport heavy, hot molds, and hot molds containing molten alloy Must pass Jaeger 2 vision test annually for depth perception when pouring alloy and setting mold position. Work Environment: (Chemical and Physical Exposures) <ul><li>Extreme care must be taken because of exposure to extremely high temperatures for short periods of time.</li><li>Exposure to dust and fumes from the casting process.</li><li>Occasional exposure to uncontained molten metal sprays and solid metal chips from chamber cleaning.</li><li>Exposure to Nickel and RCF.</li><li>Requires wearing dust mask/respirator during certain procedures.</li></ul> &nbsp;Basic Qualifications: <ul><li>High School Diploma or GED from an accredited institution.</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul> PREFERRED QUALIFICATIONS: <ul><li>Basic Computer skills.</li><li>Foundry Service Operator/Mold Handler&nbsp;experience</li></ul> About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

FS OP/MOLD HANDLER

Assistant Men's Basketball Coach-3rd Assistant UIW Mission Position Summary The Assistant Men's Basketball Coach-3rd Assistant assists the Head Men's Basketball Coach in all aspects of the Men's Basketball program. Primary tasks include but are limited to coaching, student-athlete development, recruiting, and team practices. The Assistant Men's Basketball Coach-3rd Assistant reports to the Head Men's Basketball Coach. Essential Functions Job Duties Knowledge Skills and Abilities <ul> <li>Ability to effectively recruit, coach and teach highly talented student-athletes.</li> <li>Ability to effectively scout opponents and break down game video.</li> <li>A proven record in following directives and being responsible for assigned tasks.</li> <li>Ability to effectively handle multiple tasks in a fast-paced environment as needed.</li> <li>Ability to effectively apply budgeting and fiscal planning techniques within financial constraints.</li> <li>Ability to effectively establish and maintain effective work relationships with students, faculty, staff, and the public.</li> <li>Ability to communicate effectively - orally, by phone, in person, via social media and in writing.</li> <li>Ability to effectively respond to emergency situations in a timely manner.</li> <li>Demonstrated ability to market and promote UIW men's basketball.</li> <li>Ability to work effectively with individuals from diverse communities and cultures.</li> <li>Employee shall adhere to all applicable rules and regulations of the University, the Conference, and the NCAA.</li> </ul> Required Education Bachelor's Degree. Required Work Experience Two (2) years of basketball coaching experience at the college or university level. Note that experience at the graduate-assistant level will be considered. Preferred Qualifications Four (4) or more years of collegiate basketball coaching experience. Required Certifications, Licenses or Registrations Must have a valid driver license, driving record that is insurable by UIW insurance carrier, and be at least 21 years of age, as required to drive for UIW. Work Hours Business hours of Mon-Fri 8am to 5pm with flexibility; extended hours as required, including weekends, evenings and some holidays based on team schedule. Physical Demands Typical for coach in this sport. Posting Number: AS2073PO Job Type: Full Time Job Category: Administrator (exempt) Desired Start Date: 11/18/2024 Position End Date (if temporary): Reports To: Head Men's Basketball Coach Salary: $40,988 Annualized Open Date: 10/21/2024 Close Date: Open Until Filled: Yes Special Instructions to Applicant N/A. To apply, visit <a href="https://apptrkr.com/5740853" target="_blank">https://jobs.uiw.edu/postings/27403</a> UIW is committed to a policy of equal opportunity in employment, without regard to race, color, sex, sexual orientation, citizenship status, national origin, age, marital status, disability, genetic information, gender identity or expression, veteran status, pregnancy, and religion (except in limited circumstances when religious preference is both permitted by law and deemed appropriate as a matter of University policy).jeid-cb4460995c2932498d74b2759b5b3b1d

University of the Incarnate Word

Assistant Men's Basketball Coach-3rd Assistant

Job Description and RequirementsThe RBFCU Branch Operations Team is seeking a full time Branch Member Service Representative in the Domain branch location starting at $20.00/hour!We are also offering a sign-on bonus for Branch Member Service Representatives! New hires will receive $250 in their first paycheck, $500 following 90 days of employment, and $500 following six months of employment (applicable taxes and withholdings). Join our team today!The Domain branch is located at: 10712 Burnet Rd, Austin, TX 78758.As a Branch Member Service Representative (MSR) you will be the face of RBFCU, providing exceptional service to our members and prospective members in a role that combines both Teller and Personal Banker functions.&nbsp; You’ll engage with our members and prospective members to build relationships, utilize your problem-solving skills to identify needs, and educate them on products and services that will improve their financial well-being and quality of life.&nbsp; You’ll have the opportunity to demonstrate your professionalism, initiative and desire to learn and grow with our Path to Promotion and award winning Learning and Development program. &nbsp;If you&nbsp;have a passion for helping others and aspire to work for a Best Places to Work in Texas employer, a career with RBFCU may be just for you.Essential Functions and Responsibilities: <ul><li>Provide enthusiastic, professional, quality, prompt, and courteous service to members, prospective members, and RBFCU team.</li><li>Process a variety of transactions in various settings that may include in person, video conference, drive-thru, and telephonic engagement channels.</li><li>Maintain control of cash and negotiable instruments in accordance with policies, procedures, and regulatory laws.</li><li>Perform in the capacity of Branch Reservist taking calls for the Member Service Center to handle incoming requests from members via this channel.</li><li>Assess all deposits for potential fraud and each interaction for impersonation to mitigate fraud losses.</li><li>Assist members and prospective members with needs that incorporate other internal departments, such as Consumer Lending, Mortgage and Credit Union Service Organizations, and comply with applicable policies, procedures, and regulatory laws.</li><li>Qualify members and assist with opening, updating, and closing accounts, and maintain a current working knowledge of the RBFCU Membership and Account Agreement.</li><li>Prepare various teller reports, and escort members into designated areas when requested.</li><li>Engage with members and prospective members by cross serving products and services, meeting incentive goals, and ensuring a current working knowledge of product benefits and features.</li><li>Promote product engagement and meet and preferably exceed minimum sales goals by demonstrating continued and sustained initiative to learning and offering products and services to members by using communication and listening skills to determine member needs.</li><li>Support our cross-serve/sales culture to ensure branch standards are achieved or exceeded.</li><li>Observe safety and security procedures, and report potentially unsafe conditions.</li><li>All other duties as assigned (note: essential functions and responsibilities may change or new ones may be assigned at any time with or without notice).</li></ul>Requirements:<ul><li>High School diploma or GED</li><li>Six months of work experience (financial institution, customer service or sales experience preferred)&nbsp;</li><li>Attendance and promptness are pertinent; must be able to work a flexible Monday through Saturday schedule</li><li>Must be able to cover staffing at any location within the respective region if a business need arises including branch transfers</li><li>Excellent communication and interpersonal skills</li><li>Ability to solve problems, make timely and informed decisions, and apply common sense to carry out detailed written or oral instructions</li><li>Proficient in utilizing PC, software and other office equipment</li><li>Ability to sit or stand for extended periods of time</li><li>Good vision (correctable), hearing, and manual dexterity; must be able to reach with hands and arms; must be able to speak clearly</li></ul>Preferred:<ul><li>Bilingual (English/Spanish)</li></ul>All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.

RBFCU

Domain Branch Member Service Representative - Full Time with Sign-On Bonus

Job Description and RequirementsThe Mortgage Loan Officer will evaluate, authorize, and recommend applicable credit decisions based on a detailed analysis of a member’s financial profile for the purposes of conventional lending programs.&nbsp; In addition, they will conduct a thorough needs analysis which will assist in guiding members into the most suitable loan program.&nbsp; The Mortgage loan officer will counsel the member, and collaborate with various internal/external partners, throughout the entirety of the mortgage process. Essential Functions and Responsibilities:<ul><li>Obtain, analyze and complete mortgage loan applications via web, phone or face-to-face. </li><li>Provide detailed mortgage product/process details to RBFCU members.</li><li>Obtain and analyze required member documents related to the mortgage loan request.</li><li>Accurately complete disclosures in accordance with all RBFCU guidelines and industry compliance standards.</li><li>Serve as a member advocate while maintaining the integrity of all RBFCU's policies and procedures.</li><li>Effectively communicate with all parties involved with any given mortgage transaction – including membership, real estate agents, builders and other third party partners.</li><li>Perform in a high volume and fast paced environment.</li><li>Interview members to determine financial eligibility for loans.</li><li>Effectively manage a pipeline of loans while maintaining RBFCU service level requirements.</li><li>All other duties as assigned (note: essential functions and responsibilities may change or new ones may be assigned at any time with or without notice).</li></ul>Requirements:<ul><li>High School Diploma or GED</li><li>Minimum of 12 months experience in mortgage industry or Bachelor's degree</li><li>Strong written and verbal communication skills</li><li>Strong proficiency with Excel, Outlook, Word, Power Point and DocuSign</li><li>Must be eligible to register with the Nationwide Mortgage Licensing System and Registry</li><li>Ability to work Saturday shifts as necessary</li></ul>Preferred:<ul><li>Bi-Lingual in English/Spanish</li><li>Experience with Encompass</li><li>Bachelor’s Degree</li></ul>All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.

Mortgage Loan Officer - Home Equity

Welcome to Whataburger CareersShift TypeThe Restaurant Team Member is responsible for serving customers, managing payments, cooking and preparing food, cleaning and maintaining the overall quality of restaurant services. They collaborate with other team members to deliver timely, quality service to customers.<ul><li>Cheerfully serve customers delivering accurate orders on time.&nbsp;</li><li>Prepare and deliver food products following quality standards for food preparation, handling, and food safety.&nbsp;</li><li>Collaborate with the team to ensure that all shifts are covered, and communicate issues to the shift leader, supervisor, or store manager.&nbsp;</li><li>Operate Point of Sale cashiering system and handle payments.&nbsp;</li><li>Perform cleaning duties (washing dishes, sweeping, mopping, cleaning tables, etc.) maintaining cleanliness, sanitation, and safety of the work environment.&nbsp;</li><li>Present a well-groomed, uniformed, and professional appearance.</li></ul>Key Skills<ul><li>Teamwork&nbsp;</li><li>Customer Service&nbsp;</li><li>Food Preparation&nbsp;</li><li>Cashiering&nbsp;</li></ul>Preferred:<ul><li>High school diploma/GED, or equivalent work experience.&nbsp;</li><li>Food Handlers Certification.</li></ul>17234 Northwest Fwy Jersey Village TX 77040-1112

Whataburger

Restaurant Team Member, Overnight Shift - Unit 501

Commitment to MissionThis job carries with it the obligation to uphold the Mission of Lone Star College (LSC) in carrying out the duties of the position.&nbsp; A commitment to positive interpersonal behaviors, professional communication, integrity, leadership, stewardship, respect and accountability to LSC students and employees is essential.Cultural Beliefs<ul><li>One LSC</li><li>Student Focused</li><li>Own It</li><li>Foster Belonging</li><li>Cultivate Community</li><li>Choose Learning</li></ul>The Chronicle of Higher Education's "Great Colleges to Work For®" is designed to recognize colleges that have been successful in creating great workplaces and to further research and understanding of the factors, dynamics and influences that have the most impact on organizational culture at higher education institutions.Lone Star College has been recognized in multiple categories.Qualities of ExcellenceAs faculty members of Lone Star College, we strive to create a nation of world citizenry in our students. In that pursuit, we model ways of thinking and being that incorporate diversity, equality, and equity. Our culture, then, requires the possession of transcendent qualities that, while immeasurable, are evident in global citizens. We are compassionate with our students, colleagues, and ourselves. We are innovative in the pursuit of learning. Ultimately, we create a culture where learning thrives, people are safe, and we mirror the qualities of world citizenry.Lone Star College faculty are dedicated to four qualities of excellence:<ul><li>Student Invested</li><li>Content Expert</li><li>Pedagogically Excellent</li><li>Institutionally Dedicated</li></ul>Campus Marketing StatementLone Star College-North HarrisLone Star College offers high-quality, low-cost academic transfer and career training education to 80,000+ students each semester. LSC has been named a 2023 Great Colleges to Work For® institution by the Chronicle of Higher Education. LSC consists of eight colleges, seven centers, eight Workforce Centers of Excellence and Lone Star Corporate College.Lone Star College-North Harris, nestled on 200 acres of piney woods, is the original and largest college in the Lone Star College System family. Serving the community for more than three decades, LSC-North Harris offers more than 60 programs of study, including university-transfer and numerous education courses and programs. LSC-North Harris is keenly focused on leading-edge technology in emerging technical job fields.Location address is 2700 W.W. Thorne Drive, Houston, TX 77073.Job DescriptionPURPOSE AND SCOPE:It is the responsibility of the teaching faculty to provide the learning activities and support that will lead to the achievement of the course objectives and contribute to the educational environment of the college and the community. &nbsp;Primary responsibilities are to plan, develop and teach courses within the curriculum in a manner that facilitates student learning.Adjunct faculty are hired in a part-time capacity on a semester-by-semester basis, contingent upon the needs of the System. Lone Star College accepts application material year-round from qualified applicants willing to teach on a part-time basis. Adjunct (part-time) faculty hiring is based on student demand. We offer day, evening, and weekend classes. Classes are offered at various times and locations during the academic year. As a rule, adjunct faculty may teach a maximum of five classes per academic year.ESSENTIAL JOB FUNCTIONS:<ul><li>Teaches Emergency Management courses at a variety of times and locations</li><li>Creates engaging lessons that promote student involvement and application of the material.</li><li>Submits required college reports and forms in a timely manner</li><li>Utilizes a course syllabus for each course, following established institutional guidelines</li><li>Meets with and advises students either before or after class or by appointment, electronic communication, or other appropriate methods</li><li>Evaluates students to measure their progress in achieving course objectives and informs students in a timely manner of their progress</li><li>Maintains professional relationships with students, colleagues, and the community</li><li>Attends meetings, trainings, and orientations as required</li><li>Responsible for other reasonable related duties as assigned</li></ul>KNOWLEDGE, SKILLS, AND ABILITIES:<ul><li>Mastery of course content</li><li>Demonstrated leadership skills; Style that emphasizes collaboration, teamwork, and facilitation</li><li>Excellent oral and written communication skills and interpersonal skills</li><li>Ability to appreciate alternative viewpoints; Ability to work effectively with a wide variety of people</li><li>Demonstrates interest in interdisciplinary teaching, service learning, learning technologies, course development, and adult learning methodologies including collaborative learning, learning communities and distance learning</li><li>Commitment to academic excellence, exceptional service and providing a dynamic climate for life-long learning</li><li>Demonstrated ability to develop and implement instructional approaches such as service learning/civic engagement, learning communities, and the effective use of technology</li><li>Ability to use effective strategies to engage students in their learning</li></ul>PHYSICAL ABILITIES:The work is sedentary. Typically, the employee sits comfortably to do the work. However, there may be some walking; standing; bending; carrying of light items, such as papers, books, or small parts; or driving an automobile. No special physical demands are required to perform the work.WORK SCHEDULE AND CONDITIONS:&nbsp;&nbsp;<ul><li>Equipment used includes, PC workstation running on a LAN in a Microsoft Windows environment, calculator, phone and other general office equipment, and any specialized equipment standard within the discipline/industry</li><li>Interface with internal and external contacts as needed to carry out the functions of the position</li><li>Work is performed in a climate-controlled classroom and/or lab environment with minimal exposure to safety hazards</li><li>Hours will vary depending on class time;&nbsp; Instructors are required to meet with classes at all scheduled times and be available to students outside of class instruction</li></ul>REQUIRED QUALIFICATIONS:<ul><li>Master's degree in public administration, emergency management, homeland security, or related discipline OR Master's degree with 18 graduate semester hours in public administration, emergency management, or related discipline</li></ul>Salary$58.05 per contact hour.Benefits Marketing StatementBy joining our top-notch institution, you will enjoy being a part of an organization that offers a supportive, collegial work environment, excellent work/life balance, tuition waiver, participation in a tax deferred retirement plan, professional development opportunities and more.Special InstructionsGo to the Job Search page, click on ‘My Activities’ at the top of the page. Under My Cover Letters and Attachments you will click on ‘Add Attachment.’ Please be sure to put the Job ID# in the title once you name your file for cover letters only, unless you attached your cover letter with your resume.If you are applying for an Instructional position (i.e. Faculty, Adjunct Faculty, Instructor), please ensure you include the following to be considered: Resume/CV, Cover Letter, Teaching Philosophy, and unofficial transcripts. You must limit your file name for any attachment to 40 characters or less.How to ApplyALL APPLICANTS MUST APPLY ONLINE ONLYWe will not accept application material received via fax, email, mail, or hand delivered.Postings for part-time and adjunct positions are active for the academic year.&nbsp; By selecting the option to receive notifications on your profile, you will begin receiving electronic communication regarding new opportunities with Lone Star College (LSC).If selected for an interview, a recruiter will contact you by phone, or email to schedule an interview.Lone Star College participates in the E-Verify program, under which Lone Star College provides the federal government with information from each new employee's Form I-9 to confirm that the employee is authorized to work in the United States.More information on the E-Verify program is available at <a href="http://www.dhs.gov/E-Verify" target="_blank">www.dhs.gov/E-Verify</a>.Lone Star College is an EEO Employer. All positions are subject to a criminal background check.

4,404 Full Time Jobs in Texas